Ablukast (Ro23-3544)

Alias: Ro-23-3544; Ro23-3544; Ablukast; Ro 23-3544/000; Ro 23-3544; Ro 233544; Ro-233544; Ro233544

Cat No.:V9950 Purity: ≥98%

COA Product Data Instructions for use SDS

Ablukast (Ro 23-3544) is a novel and potent leuktriene receptor antagonist with anti-asthmatic effects.

Ablukast (Ro23-3544) Chemical Structure CAS No.: 96566-25-5
Product category: Leukotriene Receptor

This product is for research use only, not for human use. We do not sell to patients.

Size	Price	Stock	Qty
5mg
10mg
25mg
50mg
100mg
Other Sizes

ADD TO CART CHECKOUT BULK INQUIRY

1-708-310-1919 sales@invivochem.com

Official Supplier of:

Business Relationship with 5000+ Clients Globally
Major Universities, Research Institutions, Biotech & Pharma
Citations by Top Journals: Nature, Cell, Science, etc.

Top Publications Citing lnvivochem Products

Nature 2021, 597(7874):119-125.

Cell 2020,183:1202-1218.e25.

Science Adv 2022: 8, eabm9427.

Nature 597, 119–125 (2021)

Cell Stem Cell 2020,26(6):845-861.e12.

Science Trans Med 2023,15(701):eadd7872.

STTT 2023,8(1):91.

Cell Reports 2023,42(4):112313

Science Trans Med 2023, 15: eadd7872.

Cancer Cell 2021,39(4):529-547.e7.

Cancer Discov 2022,12(4):1106-1127.

Immunity 2023,56(3):620-634.e11.

J Am Chem Soc 2022,144:21831-21836.

Cell 2020,183:1202-1218.e25.

Science Adv 2022:8,eabm9427.

Nature 2021,597(7874):119-125.

Cell 2020,183:1202-1218.e25.

PNAS Nexus 2022,1(3):pgac063.

ACS Nano 2023,17(10):9110-9125.

Biomaterial 2023 Sep16:302:122333.

Product Description
Bioactivity & Protocols
Physicochemical Properties
Solubility Data
Calculators

Product Description

Ablukast (Ro 23-3544) is a novel and potent leuktriene receptor antagonist with anti-asthmatic effects. It successfully lessens bronchoconstriction brought on by LTC4 and antigens.

Biological Activity I Assay Protocols (From Reference)

Targets

LTD4

ln Vitro

Ablukast (Ro 23-3544) is evaluated for its ability to mitigate allergic contact dermatitis caused by dinitrofluorobenzene (DNFB) and irritant contact dermatitis caused by croton oil in mouse ears. Treatment for dermatitis elicited within a few days and continued for up to five days after that was moderately effective in suppressing dose-dependent ear swelling caused by DNFB. The DNFB-induced ear swelling during the first 48 hours following elicitation is significantly reduced after daily pre-treatment of the ears for one week[2].

ln Vivo

Animal Protocol

Female BALB/c mice
Concentrations of 0.1 , 0.5 , 1.0 and 5.0 % of Ablukast
Applied to one of the pretreated ears 1 h after elicitation and at 24 h intervals on the following 4 days; three times daily

References

[1]. Pharmacological profile of Ro 23-3544, a new aerosol active leukotriene receptor antagonist. Adv Prostaglandin Thromboxane Leukot Res. 1987;17A:512-8.

[2]. Studies on the role of leukotrienes in murine allergic and irritant contact dermatitis. Br J Dermatol. 1988 Jan;118(1):1-6.

[3]. Pyrrolopyrimidines as phosphodiesterase VII inhibitors. US7498334B2.

These protocols are for reference only. InvivoChem does not independently validate these methods.

Physicochemical Properties

Molecular Formula	C28H34O8
Molecular Weight	498.57
Exact Mass	498.23
Elemental Analysis	C, 67.45; H, 6.87; O, 25.67
CAS #	96566-25-5
Related CAS #	96686-71-4 (S-isomer); 96686-73-6 (R-isomer); 96565-55-8 (sodium); 96566-25-5 (free acid)
Appearance	Solid powder
SMILES	CCCC1=C(C=CC(=C1O)C(=O)C)OCCCCCOC2=C(C=C3CCC(OC3=C2)C(=O)O)C(=O)C
InChi Key	FGGYJWZYDAROFF-UHFFFAOYSA-N
InChi Code	InChI=1S/C28H34O8/c1-4-8-21-23(12-10-20(17(2)29)27(21)31)34-13-6-5-7-14-35-26-16-25-19(15-22(26)18(3)30)9-11-24(36-25)28(32)33/h10,12,15-16,24,31H,4-9,11,13-14H2,1-3H3,(H,32,33)
Chemical Name	6-acetyl-7-[5-(4-acetyl-3-hydroxy-2-propylphenoxy)pentoxy]-3,4-dihydro-2H-chromene-2-carboxylic acid
Synonyms	Ro-23-3544; Ro23-3544; Ablukast; Ro 23-3544/000; Ro 23-3544; Ro 233544; Ro-233544; Ro233544
HS Tariff Code	2934.99.9001
Storage	Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Shipping Condition	Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)

Solubility Data

Solubility (In Vitro)	DMSO: ~100 mg/mL (~200.6 mM)
Solubility (In Vivo)	Solubility in Formulation 1: 2.5 mg/mL (5.01 mM) in 10% DMSO + 90% (20% SBE-β-CD in Saline) (add these co-solvents sequentially from left to right, and one by one), suspension solution; with sonication. For example, if 1 mL of working solution is to be prepared, you can add 100 μL of 25.0 mg/mL clear DMSO stock solution to 900 μL of 20% SBE-β-CD physiological saline solution and mix evenly. Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Solubility in Formulation 2: ≥ 2.5 mg/mL (5.01 mM) (saturation unknown) in 10% DMSO + 90% Corn Oil (add these co-solvents sequentially from left to right, and one by one), clear solution. For example, if 1 mL of working solution is to be prepared, you can add 100 μL of 25.0 mg/mL clear DMSO stock solution to 900 μL of corn oil and mix evenly. (Please use freshly prepared in vivo formulations for optimal results.)

Solubility (In Vitro)

DMSO: ~100 mg/mL (~200.6 mM)

Solubility (In Vivo)

Solubility in Formulation 1: 2.5 mg/mL (5.01 mM) in 10% DMSO + 90% (20% SBE-β-CD in Saline) (add these co-solvents sequentially from left to right, and one by one), suspension solution; with sonication.
For example, if 1 mL of working solution is to be prepared, you can add 100 μL of 25.0 mg/mL clear DMSO stock solution to 900 μL of 20% SBE-β-CD physiological saline solution and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution.

Solubility in Formulation 2: ≥ 2.5 mg/mL (5.01 mM) (saturation unknown) in 10% DMSO + 90% Corn Oil (add these co-solvents sequentially from left to right, and one by one), clear solution.
For example, if 1 mL of working solution is to be prepared, you can add 100 μL of 25.0 mg/mL clear DMSO stock solution to 900 μL of corn oil and mix evenly.

(Please use freshly prepared in vivo formulations for optimal results.)

Preparing Stock Solutions		1 mg	5 mg	10 mg
	1 mM	2.0057 mL	10.0287 mL	20.0574 mL
	5 mM	0.4011 mL	2.0057 mL	4.0115 mL
	10 mM	0.2006 mL	1.0029 mL	2.0057 mL

*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.

Calculator

Mass

Concentration

Volume

Molecular Weight*

Calculate Reset

Molarity Calculator allows you to calculate the mass, volume, and/or concentration required for a solution, as detailed below:

Calculate the Mass of a compound required to prepare a solution of known volume and concentration
Calculate the Volume of solution required to dissolve a compound of known mass to a desired concentration
Calculate the Concentration of a solution resulting from a known mass of compound in a specific volume

See Example

An example of molarity calculation using the molarity calculator is shown below:
What is the mass of compound required to make a 10 mM stock solution in 5 ml of DMSO given that the molecular weight of the compound is 350.26 g/mol?

Enter 350.26 in the Molecular Weight (MW) box
Enter 10 in the Concentration box and choose the correct unit (mM)
Enter 5 in the Volume box and choose the correct unit (mL)
Click the “Calculate” button
The answer of 17.513 mg appears in the Mass box. In a similar way, you may calculate the volume and concentration.

Concentration (Start)

Volume (Start)

Concentration (End)

Volume (End)

Calculate Reset

Dilution Calculator allows you to calculate how to dilute a stock solution of known concentrations. For example, you may Enter C1, C2 & V2 to calculate V1, as detailed below:

What volume of a given 10 mM stock solution is required to make 25 ml of a 25 μM solution?
Using the equation C1V1 = C2V2, where C1=10 mM, C2=25 μM, V2=25 ml and V1 is the unknown:

Enter 10 into the Concentration (Start) box and choose the correct unit (mM)
Enter 25 into the Concentration (End) box and select the correct unit (mM)
Enter 25 into the Volume (End) box and choose the correct unit (mL)
Click the “Calculate” button
The answer of 62.5 μL (0.1 ml) appears in the Volume (Start) box

Molecular formula

Total molecular weight

g/mol

Calculate Reset

Molecular Weight Calculator allows you to calculate the molar mass and elemental composition of a compound, as detailed below:

Note: Chemical formula is case sensitive: C12H18N3O4 c12h18n3o4
Instructions to calculate molar mass (molecular weight) of a chemical compound:

To calculate molar mass of a chemical compound, please enter the chemical/molecular formula and click the “Calculate’ button.

Definitions of molecular mass, molecular weight, molar mass and molar weight:

Molecular mass (or molecular weight) is the mass of one molecule of a substance and is expressed in the unified atomic mass units (u). (1 u is equal to 1/12 the mass of one atom of carbon-12)
Molar mass (molar weight) is the mass of one mole of a substance and is expressed in g/mol.

Volume (to add to vial)

Mass (in vial)

Desired Reconstitution Concentration

Calculate Reset

Reconstitution Calculator allows you to calculate the volume of solvent required to reconstitute your vial.

Enter the mass of the reagent and the desired reconstitution concentration as well as the correct units
Click the “Calculate” button
The answer appears in the Volume (to add to vial) box

In vivo Formulation Calculator (Clear solution)

Step 1: Enter information below (Recommended: An additional animal to make allowance for loss during the experiment)

Dosage mg/kg

Average weight of animals g

Dosing volume per animal μL

Number of animals

Step 2: Enter in vivo formulation (This is only a calculator, not the exact formulation for a specific product. Please contact us first if there is no in vivo formulation in the solubility section.)

% DMSO

% Tween 80

% ddH₂O

Calculate Reset

Calculation results

Working concentration： mg/mL；

Method for preparing DMSO stock solution： mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.

Method for preparing in vivo formulation:：Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH₂O，mix and clarify.

Note： (1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
(2) Be sure to add the solvent(s) in order.